Three-phase AC variable frequency power supply

Three-phase AC variable frequency power supply

  • Wide-range voltage regulation, output voltage adjustable from 0 to 300V,line voltage adjustable from 0 to 519.6V (or optional higher voltage), suitable for different device voltage requirements.
  • The alternating current frequency can be adjusted within a certain range (such as 45Hz~65Hz or an optional higher 400Hz) to simulate the power grid standards of different countries (50Hz/60Hz) or special requirements.
  • Can carry different types of loads such as resistive loads, inductive loads, and capacitive loads.
01
Can simulate different global power grid standards, such as Japan 100V/200V/50Hz, USA 120V/240V/60Hz, Europe 230V/400V/50Hz.
02
Capable of driving high-impact current loads, with an instantaneous peak current up to
03
times the rated value.
04
Sudden load increase/decrease causes rapid voltage recovery to prevent equipment shutdown.
05
Can easily start motors, compressors, and other high inrush current loads.
06
Automatically limits the maximum current while maintaining a stable output voltage.
07
Overload/short circuit protection; over-temperature protection to prevent IGBT from overheating and damage.
08
Functions can be added as needed, such as: higher frequency (400Hz), higher voltage (400V, 500V, 600V, etc.).

Equipment Introduction

1、Equipment description

Yidi Electronics 83 Series Three-Phase AC Voltage Stabilizer and Frequency Conversion Power Supply, adopts SPWM modulation control technology, achieving intelligent and precise regulation of the power supply output, with pure output waveform. By adjusting the output voltage and frequency, it can simulate power grids of various countries, thereby testing the grid adaptability of various products. It can also meet long-term production line power supply needs, such as basic power supply, load aging, etc. Parameters and test programs can be quickly edited and switched via digital keyboard. Widely used in electrical product production lines, quality inspection institutes, laboratories, and other fields.

yidi8100XS.webp

2、Applicable load types

This series of AC stabilized frequency converter power supply has strong load adaptability, and within the permitted power range, it can carry various types of inductive loads, capacitive loads, and resistive loads. It features a good shock resistance design and can easily carry various tested products.

Load type

Resistive load

Emotional load

Capacitive load

Waveform diagram

Current and voltage in phase

Current lagging voltage

Current leads voltage

Typical equipment

Electric stove, incandescent lamp, etc.

Motors, transformers, etc.

Capacitors, switching power supplies, etc.

Key Features

No impact current, stable energy consumption

High inrush current, easy voltage drop

Instant high current, surge protection needed


3、Functional Features

• Full range adjustable output voltage and frequency setting range (phase voltage 0-300V, line voltage 0-519.6V, frequency 45-65Hz);

• Using IGBT/ PWM technology and switch amplifier design;

• The stability rate of output voltage can reach 0.5%;

• Single-phase and three-phase loads that can be carried, with waveform distortion less than 1% under resistive load;

• High startup load capacity, super strong output peak factor 3:1;

• Transient response is quick, and the waveform can recover within 2ms during instant load or unload.

• Special constant current output design, easily start high inrush current loads such as motors and compressors;

• Output overload, short circuit, over-temperature protection and alarm;

• Provides 7 memory groups for quick recall and output of different memory values (such as voltage, frequency, and upper current limit);

• Other special requirements can be customized.

 

4、Technical Parameters

Model

83009T-E

83010T-E

83015T-E

83020T-E

83030T-E

Input Voltage/Frequency

Power supply: Configure according to the power grid of the country where this product is used.

Output Voltage/Frequency

Relative pressure 0.0-300.0V (line voltage 0.0-519.6V), 45-65Hz

Output power

Total Power

9KVA

10KVA

15KVA

20KVA

30KVA

Single-phase power

3KVA

3.33KVA

5KVA

6.66KVA

10KVA

Maximum current

0-150V (@110V)

27.27A

30.30A

45.45A

60.60A

90.90A

150.1-300V (@220V)

13.63A

15.15A

22.72A

30.30A

45.45A

Appearance size

W*D*H (mm)

550*800*955

600*1000*1105

Configuration

LED display, 7 memory groups, communication interface, PLC remote control interface


Model

83045T-E

83060T-E

83075T-E

83090T-E

83100T-E

Input Voltage/Frequency

Power supply: Configure according to the power grid of the country where this product is used.

Output Voltage/Frequency

Relative pressure 0.0-300.0V (line voltage 0.0-519.6V), 45-65Hz

Output power

Total Power

45KVA

60KVA

75KVA

90KVA

100KVA

Single-phase power

15KVA

20KVA

25KVA

30KVA

33.3KVA

Maximum current

0-150V (@110V)

136.3A

181.8A

227.2A

272.7A

303.0A

150.1-300V (@220V)

68.16A

90.90A

113.6A

136.3A

151.5A

Appearance size

W*D*H (mm)

650*1200*1155

650*1350*1255

800*1500*1255

Configuration

LED display, 7 memory groups, communication interface, PLC remote control interface


Model

83120T-E

83150T-E

83180T-E

83200T-E

83250T-E

83300T-E

Input Voltage/Frequency

Power supply: Configure according to the power grid of the country where this product is used.

Output Voltage/Frequency

Relative pressure 0.0-300.0V (line voltage 0.0-519.6V), 45-65Hz

Output power

Total Power

120KVA

150KVA

180KVA

200KVA

250KVA

300KVA

Single-phase power

40KVA

50KVA

60KVA

66.6KVA

83.3KVA

100KVA

Maximum current

0-150V (@110V)

363.6A

454.5A

545.4A

606.0A

757.6A

909.1A

150.1-300V (@220V)

181.8A

227.2A

272.7A

303.0A

378.8A

454.5A

Appearance size

W*D*H (mm)

800*1600*1405

850*2200*1755

850*2600*1855

850*3000*1955

Configuration

LED display, 7 memory groups, communication interface, PLC remote control interface


Related Products

0.094565s